Cleaning Composite Decks

All of us consumers are realizing that no wood or wood product confronted with weather is going to be completely maintenance-free. Even exotic woods including Ipe require periodic cleaning and sealing as the herbal oils within the wood dry out. All exterior lumber used in decks construction should be maintained every year to protect it from the elements in addition to ground in dirt.

Composite lumber varies from maker to manufacturer, but it appears that all of the popular kinds contain wood particles (these ground particles are called “wood flour” by the industry). That means that any of these particles in or near the surface of the board, no matter what they are blended with, will react to Mother Nature the same way all wood does. Graying and staining are common problems – and the stuff regarding nightmares for deck owners. Manufacturers are getting calls every single day from end users about these issues, and deck restoration technicians are stepping in with the fix.

Cleaning composite units is important to keep the material looking its best. Properly clean-up composite decks should be done with a composite wood solution that is designed specifically for these unique materials. Some manufacturers have got suggested using bleach or oxygenated bleach to clean the particular wood, but the results have been varied. Most pressure cleansing contractors who do deck renewal are finding success by means of products made especially for this problem, such as Flood’s Composite Timber Cleaner. The key to this particular product is in the surfactants and cleaning up chemicals in its formula.

This guide will give you the basic steps that ought to be used to get the best results when cleaning composite floor materials.

Preparing the composite deck: Sweep debris for instance leaves, twigs and dirt off the deck first. And then rinse off the composite lumber to cool it down and remove heavy built up deposits of dirt and dust. Rinsing off the composite deck first will cool the image surface and prevent the possibility of flash drying the composite cleaner whether it is applied. Also wet down plants and grass across the deck and if necessary, Cover plants, grass, concrete plus any other areas you don’t want the composite cleaner doing.

Remove any stains on Composite decking and cladding from Ecoscape UK first! Make use of oxalic, citric or phosphoric acid-based cleaners to remove corrode stains from metal furniture. These will also help get rid of leaf stains.

Use commercial degreasers containing propylene glycol, sodium hydroxide, and various detergents for removing fat and oil stains.

Spot removers or mineral tones may be used carefully on stubborn grease or oil unsightly stains but should be washed off quickly with water, as it may damage the grain pattern. Spot removers normally contain petroleum distillates, xylene, methanol, acetone, or other organic and natural solvents. Use caution if the composite lumber has embedded shade, as some solvents may affect the appearance. As always, try out your cleaner on an inconspicuous spot.

To remove light mildew rinse your composite deck periodically with a cleaner that contains or perhaps is mixed with Sodium Hypochlorite.

The cleaning process:

Utilize your composite deck cleaner on the railings and flooring in manageable sections. Cleaning too large of an area at any given time may allow the composite cleaner to dry on the surface which can result in discoloration in some materials. Once the composite cleaner has seated on the surface according to the directions, carefully power wash the surface on the the grain, using less than 800 PSI. Use the strain washer to “rinse” the surface. Avoid holding the nozzle too close to the composite surface or holding it in different one spot too long. Hold the pressure wand about 8″ away from the surface and “sweep” it off in a rinsing motion. Use a “golf swing” motion, and avoid washing each and every square inch of the surface. Keep the wand moving efficiently over the surface to avoid leaving marks. Proper technique establishes the results, so take some time to practice when you are able to. Once you have accomplished that section, treat the next area and continue before the job is completed.